Double Glazing Lock Repairs
Having quality locks on your windows and doors can stop burglars from gaining access to your home. In general, they don't enjoy breaking glass or slipping through open windows.
However, some double glazing owners have had issues with their door or window lock after it was installed. Fortunately, these issues can be fixed without having to pay for new double glazing.
Broken or damaged locks
If your uPVC door or window lock is broken or faulty or has a problem, a locksmith will repair it for you. They will be able to fix the striker plates, hinges, and locks on your double glazing. They can also adjust the cylinder to fix any misalignment which could cause your handle to operate correctly.
If the key fits into the lock, but it doesn't turn or is difficult to insert the mechanism might be seized up. This can be due to dirt or grime getting stuck inside the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. It is essential to make use of a dry lubricant like graphite or teflon instead of oil which can attract dirt and stick to the inside of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should make through the mechanism, and the lock should be able to turn without difficulty.
A faulty lock can also be caused by loose screws inside the mechanism of the lock. They can become loose and break off or fall out completely which can stop the lock from functioning properly. These screws can be tightened with a screwdriver, but be cautious not to tighten them too much. This could cause damage to the internal components.
A faulty lock can be dangerous for you and your family members, especially if you have small children. It can be easy for them to open the door without you knowing, and this can give them access to your home. If you're concerned about this happening, a licensed locksmith can offer rapid and effective service to secure your double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on both uPVC doors and windows. We can also modify your uPVC or double glazing locking system to meet your specific requirements, meaning that in most cases, replacement doors and windows are not necessary.
Broken or Faulty Handles
A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is an excellent option for those who are concerned about criminals who are looking for ways to gain access to your home. It is also a good idea to ask your locksmith about anti-lift blocks, these can be fitted with the locks already in place and ensure that your window is locked in a closed position.
Handle locks are usually damaged or fail. They are the first part that a criminal will utilize to force open your window. The good news is that this is one of easiest parts to repair.
Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to resist forced entry. This upgrade to security is typically available as an extra on new uPVC window installation. As an alternative upgrade, older aluminium or uPVC handles that are no longer used can be upgraded to the shoot bolt locking system.
It is crucial to fix the handle as soon as possible after it has been damaged. Faulty handles can prevent the window from closing properly and allow drafts in. It can also be a flaw that opportunistic thieves could take advantage of and put the belongings of your family and your own at risk.
The process of fixing the failed mechanism starts with opening the frame of the window and then removing the damaged handle. The gearbox that opens the handle is then accessed and the type identified so a replacement can be found that is in line with the profile of the internal window frame here mechanism.
Once the mechanism is replaced, the handle can be re-attached using the original screws - but we would recommend replacing them with larger ones since this will provide the most secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further deterioration. After that the window will be operational again, and at only a fraction of double glazed window suppliers near me the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows do not close properly, you may suffer from draughts or the weakening of your home's security barrier, and an increased chance of damp or water damage. Windows hinges that break or fail to function properly are a common problem and are easily fixed.
If you have a uPVC window that isn't able to open or close and close, it's likely that your hinges are damaged or broken and require replacement. While many window companies require you to purchase a whole new window unit to fix this simple problem We can replace the hinges that are damaged and save you money.
Window hinges can be damaged by repeated use or they are weakened over time by corrosion. If you find a damaged hinge, it's important to take steps to prevent further damage by being careful not to force the window to close or open.
Identifying your hinge type will help you find the right parts to repair it. Maco, Mila and Roto are all brands of window hinges. Talk to a professional before purchasing parts that will not fit into your existing hardware. This can result in more damage.
The hinges that are not working properly can be a huge issue for uPVC windows and doors. They can be the main source of noise, and can also allow water to infiltrate your windows.
Make sure that the pin barrels on both sides of the hinge are aligned. If not tapping the headpin, use the hammer to create an incline in the hinge barrel. This will keep the pin in place. Then, ask a friend to hold the door while you take the hinge screws and hinges from both the doorjamb and the door. Replace the hinges with those that are the same size and attach the screws using glue. Finally, while the glue is drying, secure the hinges using clamps or weights.
Once the hinges have been fixed after which you will be able to re-install the door and then reattach the handle. It is a good idea to replace the screws with the same length of dowels as the screw that was originally used so that they align with each other.
Broken or damaged glass
uPVC Windows can become damaged over time, double glazing units near me despite the fact that they are extremely effective in keeping cold out and keeping the heat. This could include broken or damaged glass as well as faulty locks. If left unattended, this can turn into a major expense. It can also detract from the aesthetics of your house and can lead to loss of insulation, so it's important to repair any damage as soon as possible.
You can fix your cracked glass yourself if you have the right tools and techniques. First, ensure that the surrounding area surrounding the glass is clean so that any shards won't injure anyone and aren't an accident hazard. Remove all broken glass pieces and dispose of them in a appropriate manner. Apply masking tape to the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window it's a good idea fit the glass pane before glueing it back in place so that you know you'll have enough space complete the project.
Use a dry, clean cloth to clean the surface of the broken glass and the frame before applying the glue. Follow the curing and application directions, which may vary from product to product. You may need to clamp the glass that has cracked double glazing repairs near me with lightweight clamps designed to hold fragile materials, depending on the angle.
After the adhesive has fully cured, carefully reinstall the glass into the window frame, making sure it's flush with the edges of the frame, and there are no gaps between replacement double glazing units near me the glass and the window sash. Avoid flexing the glass as you put it back in place in order to weaken the seal. This could result in water infiltration or condensation.
If you have a glass window that is completely broken or has larger cracks, consult a professional glazier such as O'Brien(r) to organise an exchange. If you leave broken glass unattended, it could pose a safety risk for pet and children, so it's essential to act fast.